Home » Biomimetics » A Biomimetic Study of Arctium minus (Burdock) Part II – Imaging Small (~mm) Hooks of Cellulose and Insect Chitin

A Biomimetic Study of Arctium minus (Burdock) Part II – Imaging Small (~mm) Hooks of Cellulose and Insect Chitin

A Biomimetic Study of Arctium minus (Burdock) Part II – Imaging Small (~mm) Hooks of Cellulose and Insect Chitin

Bruce Saunders

Abstract

As part of a project in producing a novel product from the burdock hook after biomimetic methodology developed by S N Gorb, this paper describes an investigation into the most appropriate method of shape acquisition for the purposes of reproduction and product development. This morphological study investigates confocal microscopy, 2-D digitising and the use of a microtome and digitising software. Small structures of cellulose and insect cuticle are imaged using confocal microscopy and the benefits and disadvantages of this approach are noted. A 3-D image of the burdock hook is produced from a 2-D digitised profile using SolidWorks 2004.  

Keywords:  Reverse engineering, shape acquisition, confocal microscopy, 2-D digitising, finite element analysis, rapid prototyping, Solid Works, cellulose, insect chitin, miniaturisation

 

1  Morphological Studies

This phase of the study concerns itself with recording shapes for the purposes of engineering analysis and reproduction.

1.1   Predictive and descriptive engineering

Predictive engineering is conventional engineering. A part is described with technical drawings and then analyzed to predict its behaviour and then constructed. Descriptive engineering is reverse engineering. An existing structure or mechanism is described and analyzed as it exists. Building restoration is a form of reverse engineering, particularly if the building is old and forgotten techniques are used to restore a building to its original condition. Engineered parts for which technical drawings have been lost or gone missing are reproduced using reverse engineering. Seeking to manufacture a product from a biological structure for which there never were any drawings, equally, is a form of reverse engineering.

     Attempting to manufacture a structure that precisely mimics a biological structure is an attempt to unite both the prescriptive and descriptive, i.e.  to use the prescriptive language of engineering to describe and analyze that which already exists, for the purposes of reproduction.

1.2   Shape Acquisition

Shape acquisition has a history in biological studies. From the first cave drawings man has endeavored to reproduce that which he observes in nature. Today, shape is used to provide clues as to internal composition of a biological structure when considered in the context of biomaterial strengths and behaviour and the use of the principle of shape optimization.

     Dai, Gorb and Schwarz [1]used methods of analyzing 2-D radii of curvature in insect tarsii to identify structural anomalies which superficially would seem to indicate zones of weakness or stress concentration but in reality identify zones of localized hardening/strengthening due to the presence of zinc or other trace minerals in the insect cuticle. When a structure does not break under loading when the shape of the structure would seem to indicate that it should, there is an indication that some material discontinuity is responsible.

     Beraldin et al [‎2] in their paper on the virtual reality applications of scanning technology discuss the use of data transfer for layered manufacture and rapid prototyping. Confocal microscopy makes use of light intensities provided by fluorescing molecules to form images of minute structures and their internal components. Evans et al [‎3] used this physical phenomenon and technology, by casting the external morphologies of bat’s teeth to generate 3-D images of teeth to study wear patterns.

     Finite element analysis comprises the precise division of a 3-D morphology into vertices and edges in order to compute stresses at a distance from an applied load in a structure. Surface modeling using constructs such as the Canny edge detection method to create order out of data clouds, transforming them into a triangulated form for the purposes of creating 3-D surfaces.

2  Aim

The above introduction prompted the following questions:

  1. Can a mesh formed from random points of light intensities be used to form a finite element analysis mesh?
  2. Can a mesh formed from random points of light intensities be used to form a mesh for conversion to .stl format and sent to a rapid prototyping device?
  3. Can small structures be imaged using a confocal microscope without the use of the casting methods of Evans et al?

2.1   Microscopy Techniques

The following techniques were the focus of preliminary investigation, through the lectures of Dr I Jones, then of the Neuroscience Department at the University of Bath [‎4]:

  1. The principles of fluorescence microscopy
  2. Epi-fluorescence microscopy
  3. Confocal microscopy
  4. 2-photon microscopy
  5. Near field scanning optical microscopy

     The fluorescence effect is produced by irradiating atoms with a high energy light source (laser) which causes excitation of orbiting electrons. These electrons jump “outwards” to high energy orbitals before returning to their normal state, releasing energy at a specific wavelength which is detected via an emission filter.

     Confocal microscopy makes use of a laser light source whereas epi-fluorescence microscopy makes use of a normal bright light source and two filters, an excitation filter and an emission filter. Samples are viewed through an eye-piece.

     The advantages of confocal microscopy using a laser light are:

  • Reduced blurring
  • Increased effective resolution
  • Improved signal to noise ratio
  • z-axis scanning
  • depth perception
  • magnification is electronically adjusted
  • there is clear examination of thick specimens

The following procedure is described by Evans et al for the production of cubic voxels and virtual reality applications from his paper on the imaging of mammalian teeth [‎3].  It essentially notes how to take a suitable image of a small object (~mm) for the purposes of digitizing, reproduction and study in virtual reality.

     In capturing an image it must be born in mind that the goal was an accurate 3-D model for both virtual reality applications. It is important to set the slice thickness accordingly to arrive at an undistorted image i.e. cubic voxels.  The paper by Evans et al details a method of taking a cast of a tooth which is more technically cumbersome than simply putting a microscope slide with specimen under the objective and so some of his paper is not relevant here (the details concerning the casting of the teeth).

     Optical slices were taken through the x, y plane where each slice was square (e. g. 256 x 256) pixel 8-bit image at medium scanning speed.

     Slices must be taken at the same distance as the interval between pixels to make cubic voxels.

     Software such as Zeiss is used to generate a 3-D image from the stack of slices, where pixel intensity represents height and the z-height is found by comparing the intensities for each x, y point (in fact, a column of pixels all with co-ordinates (x, y)). In most of the tests run by Evans et al, the cubic voxels (and z-interval) were 7.8 mm long, generated in one of two methods:

  1. For the x 5mm lens – a 256 x 256 pixel image was scanned at zoom 1 (field of view (FOV) of 2 x 2 mm), or a 128 x 128 pixel image was scanned at zoom 2 (FOV 1 x 1 mm)
  1. For the x 10mm lens, a 128 x 128 pixel image was scanned at zoom 1 (FOV 1 x 1mm)

     Therefore using a lens with a field of view (FOV) of 2 x 2 mm at a setting of zoom 2 reduces the field of view to 1 x 1.

     Surface noise can affect the image and give a false indication of where the true surface lies.  Evans et al did experiments with the x 5 and x 10 lens to see how best to obtain the most accurate surface image. They used two techniques to try to reduce surface noise; accumulation and averaging. Accumulation is to accumulate and average several images at each z height and then create an image from the accumulated image slices.  On the microscope, for example, an “Accumulation 2” scan stands for the number of slices that are averaged (two).

The second method was to take the average of a number of reconstructed 3-D images of the same area. This was tested using a specially prepared and dimensionally precise standard glass specimen and comparing resultant images. The specimen was cubic and so without any undercuts but with a 45o fillet.  Inner width was 1.3mm and outer width 1.7mm.

     It was found that averaging produces better results than accumulation.     Sanson et al used a resin casting of their teeth specimens which was coated with eosin, a fluorescent dye. 

2.2   Confocal Microscopy: Apparatus and method

It was decided that small biological specimens could possibly be translucent enough to laser light such that it might not be necessary to use the casting method of Evans et al.  Instead it was decided to attempt to image plain untreated specimens of cellulose and insect chitin.

     A specimen burdock bract was mounted upon a “well” microscope slide in distilled water (it is a feature of both confocal and atomic force microscopy that specimens may be mounted without treatment) and placed under the objective of a confocal microscope. (Sincere thanks are due to Dr Ian Jones, post-doctoral researcher in Neuroscience in the Biology Department, University of Bath for his curiosity, assistance and instruction on operating the microscope.). 

     Confocal microscope and scanner:

  • A Zeiss Axiovert single photon confocal microscope (inverted microscope with the objectives underneath the platform).
  • Zeiss LSM 510 module (laser scanning microscope) with 2 lasers
    • 1 x Argon (488nm)
    • 2 x HeNe (543nm & 633nm)

     Objectives:

  • all x 10, 40(oil), 63(oil) & 63(water)
  • digital zoom up to x 200
  • differential interference contrast.

     The field of view: 1 x 1 mm.

     Pinhole setting: 1 optical unit.

     Scanning slice thickness: 19nm

     Also:

  • Well slides which are microscope slides with a bowl ground out in the centre to receive specimens that are not flat.
  • Distilled water as a medium for slide mounting.
  • It is important to get the hooked specimen in the right orientation on the slide to avoid displaying an undercut surface to the laser light. 
  • It is important to optimise the strength of the laser and reduce the required depth of penetration to prevent excess bleaching. 
  • The same specimen can be remounted a number of times in different orientations in the slide to fully expose the complete detail of the structure. 

3  Results

When suffused with the laser light at three different frequencies it was found that the burdock hook fluoresced well under the green laser light.  Under the red and blue light the resulting image was less distinct but these colours worked well for the insect tarsii. The stacked image is then output to file and stored as a sequence of .tif files that are viewed in .avi format (see below for the full range of .tif images).

3.1   Burdock hook stereograms

Stereogram images of the hook follow (‎Figure 1, ‎Figure 2‎, Figure 3). The data from the confocal microscope is a sequence of image slices that are then automatically reassembled (stacked). Evidence of the stacking can be observed in the images from the stepped outline of each image. The glow that surrounds the stereogram images derives from the fact that this view of the hook is assembled using standard confocal software and the viewer is looking through preceding and following images which are a result of the perspective of looking at angled images.  Only in a profile image does a stark outline of the hook show.  There is an artefact on the microscope slide that shows to the side of the hook.

 

Figure 1:Stereogram 1 of the burdock hook specimen

 

Figure 2:Stereogram 2 of the burdock hook specimen

 

Figure 3:Stereogram 3 of the burdock hook specimen

(Dr I Jones, October 2002)

3.1.1    Burdock  .tif images

     The individual .tif images that make up the above stereogram are below (see ‎Figure 8) imaged under the green light. The specimen was lying upon its side for the z-axis scan to minimise the number of scans required to scan the entire specimen, with the hook in profile to take into account undercut of the hook.

1.    2. 3.

 4.  5.  6.

 7. 8.  9. 

10.11.12.

13.14.15.

16.17.18.

19.20.

 

Figure 4:1 – 20 The individual z-axis scan .tif files that make up the stereogram of the burdock hook (the scale bar defines 200 microns)  (Dr I Jones October 2002).

     Note that the images from the confocal microscope show some internal structure of the hook, particularly the cellulose microfibrils.  These microfibrils are visible in the next experiment which fractures the hooks in a tensile tester. The hooks are made up of cellulose fibres bound together with hemi-cellulose to form microfibrils [‎5]. The curves of the hook are smooth suggesting that the material is homogenous.

     Figures 5 and 6 show the tarsii of two insects, a common grasshopper and a common bee, both composed of insect chitin. Tarsi and setae are clearly visible.

3.2   Grasshopper .tif images

1   2  3  4

5   6   7  8   

9  101112

13141516

17181920

21222324

2526    2728

2930  

Figure 5:1 – 30 The individual z-axis scan .tif files of the scan through the tarsus of a common grasshopper (the scale bar defines 200 microns)  (Dr I Jones October 2002).

3.3   Bee .tif images

1   2  3  4

5   6   7   8  

9  101112

13141516

17181920

21222324

25262728

2930

Figure 6:1 – 30 The individual z-axis scan .tif files of the scan through the tarsus of a bee (the scale bar defines 200 microns)  (B Saunders October 2002).

3.4   Discussion

     Can a mesh formed from random points of light intensities be used to form a finite element analysis mesh? No, because finite element analysis requires discrete points to form a continuous scaffold for the purposes of calculation. Only carefully constructed shapes in finite element software can be meshed for the purposes of structural analysis. Edge detection and data clouds of light intensities do not yield the ordered data sets required to form a finite element scaffold.

      Can a mesh formed from random points of light intensities be used to form a mesh for conversion to .stl format and sent to a rapid prototyping device? Yes, as is indicated by Beraldin et al above. There is software available on the market that allows for file conversion to .stl format required for a rapid prototyping device. There needs to be some consideration as to the purpose of the imaging.  There are limitations to the capabilities of a rapid prototyping device which means that any reproduction would lose its scaling effects. Sanson et al [‎3] used confocal microscopy combined with taking casts of bat’s teeth to produce images of tooth wear patterns to be studied using virtual reality. Beraldin et al described a variation of the technique which could be applied to any stack of data points to produce a resin model from a rapid prototyping device or a model in virtual reality applying it to works of sculpture but the question needs to be asked: of what practical use would a large scale resin model of a biological structure be apart from fulfilling some educational role? The virtual reality applications particularly with respect to the medical field would seem more important.

     Can small structures be imaged using a confocal microscope without the use of casting methods? Yes. The first method of shape recording selected was the use of confocal microscopy. Confocal microscopy has a particular attraction due to the fact that specimens need only be mounted in a distilled water solution and the examination is non-destructive. The ambition of this experiment was to seek a method of direct data transfer without recourse to curve-fitting for moving directly to a prototyping device.

     Finite Element Analysis cannot be abandoned for the purposes of product design therefore confocal microscopy and the random mesh arising from its imaging loses its attraction. Instead a more ordered form of image acquisition is used. Why? Because the purpose is to manufacture a product out of a standard material and there is a need to predict behaviour.

3.5   Conclusion

     Confocal microscopy is commonly used in the field of neuroscience. Its application to the field of biomimetic study could be controversial since it is expensive hardware and memory intensive. This notwithstanding, memory capacities are increasing and technology advancing at a speed which may make its use more frequent in the future.

     In reality a confocal microscope and its output is a laser scanner like many others on the market, engineered for microscopic applications. The random nature of measurement of light intensities is suitable for conversion to .stl files and this was shown by Dr Dylan Evans who used an MRI scan, also an output of image sections, to construct a model of the human heart using a rapid prototyping device. But it is not suitable for the ordered nature of Finite Elelment Analysis.    

     There is not yet a unifying and truly descriptive and prescriptive method of shape acquisition. The compromise is creating a mesh for the purpose of surface modelling and a second mesh for the purpose of finite element analysis, each mesh deriving from a different data set. And because commercial design packages include .stl compatibility the following method was adopted.

4  Alternative Morphological Recording: Sectioning and 2-D digitizing

It is appropriate to consider an alternative means of collecting morphological data on the hooks.  This comprises of using a microtome and a digitizer with a finite element package such as Solid Modeling. One begins by taking into account that one shall be using a Solid Modeling feature known as “loft”. This requires what is known as a “path” which is a digitized spine along which a number of cross-sections shall be distributed prior to rendering of the object in 3D. Digitizing the upper and lower profiles provides for a smoother model by providing two paths to support the intervening profiles. Thereafter, using the microtome to section at predefined and measured intervals along the profile, a number of cross-sections are taken perpendicular to the inner spline and each digitized.  Each section is preserved so that the sectioned material can be inspected. This method would seem to be particularly applicable to the biomimetic study of insect tarsi.

     The data is transferred to the Solid Modeling package to reconstruct the hook in 3 dimensions.  The advantage to this form of morphological recording is that it is cheaper and mobile compared to a confocal microscope – the digitizer, microtome and software are relatively commonplace, the digitized sections are distinct and internal detail is revealed by the sectioning and this can be included in the reconstruction.

     Alternatively a simple silhouette can be used, measured and reconstructed. It was assumed each profile was circular which is clearly not entirely true but is a close enough approximation for the purposes of illustration.

Figure 7:Figure 1 – Electron micrograph with grid superimposed. Each bar represents an interval of 100 microns.

     Using ‎Figure 7 it was possible to digitise two splines for the inner and outer profiles. Diameters were measured perpendicular to the inner spline and used to reconstruct the hook using the loft feature, the result of which is shown below.

Figure 8:3-D image of reconstructed burdock hook. For scale compare with scale bar of Figure 7.

5  Conclusions

The generation of a product from a biological structure combines prescriptive and descriptive processes. At present technology does not allow us to make the transition smoothly. Finite element analysis and graphical representation utilise the 3-D meshing of data points for differing purposes.

     Small biological structures of cellulose and insect chitin are translucent to laser light and therefore can be scanned with non-destructive results. This may also be true of other biomaterials. Commercially available software can be utilised to convert the resultant dataclouds to 3-D models but this does not mean that the model is suitable for finite element analysis.

     In terms of efficiency based upon cost and computational effectiveness including memory storage, confocal microscopy is more expensive than conventional methods of sectioning and digitising. However in terms of operator time it is by far the cheapest.

     It could be possible to use the confocal microscope to perform data capture and export the product to a finite element package, thereafter to re-mesh to perform finite element analysis. This is not so simple as it might seem, however, since finite element analysis has its own demands in terms of discrete vertices and lengths that must be fulfilled via the act of drawing construction by the user. These needs are not fulfilled by appointing relatively random vertices of light intensities that arise through the act of laser scanning a biological structure.

     It has been established in Part I that the burdock hook consists of a uniform biomaterial which is known to be anisotropic. It is sensitive to shear due to the bending moment of loading and resistant to flexing. It is formed to shear under heavy loading and to be receptive to many different substrates. The burdock hook, through its flattened bract support, has a single degree freedom which increases its propensity to attach.

References

[1]    Dai Z, Gorb S N, Schwarz U,Roughness-dependent friction force of the tarsal claw system in the beetle Pachnoda marginata (Coleoptera, Scarabaeidae), Journal of Experimental Biology, 205, pp. 2479-2488, 2002

[2]    Beraldin J. A., Blais F., Boulanger P., Cournoyer L., Domey J, El-Hakim S. F., Godin G., Rioux M., Taylor J., Real world modelling through high resolution digital 3D imaging of objects and structures. ISPRS Journal of Photogrammetry and Remote Sensing, 55, pp. 230-250, 2000

[3]    Evans A. R, Harper I S, Sanson G D,Confocal imaging, visualisation and 3-D surface measurement of small mammalian teeth. Journal of Microscopy, 204, Pt 2 pp. 108-119 2001

[4]    Jones  I., Personal Communication, November 2002, Research Officer, Neuroscience, Department of Biology, University of Bath, Bath, UK

[5]    Vincent J. F. V., Structural Biomaterials, The Macmillan Press, 1982

[6]    Sellinger A, Weiss P. M., Nguyen A., Lu Y., Assink R. A., Gong W., Gong C., Brinker C. J., Continuous self-assembly of organic-inorganic nanocomposite coatings that mimic nacre. Nature, 394, pp. 256-260 (1998)

[7]    Devlin R. M., Witham F. H., Plant Physiology, Fourth Ed., Devlin and Witham, PWS, 1983


826 Comments

  1. This information is worth everyone’s attention. How caan I find
    ouut more?

  2. Greetings! Very useful advice within this article! It is the little changes that produce the biggest changes.
    Thanks a lot for sharing!

  3. Its like you read my mind! You appear to know so much
    about this, like you wrote the book in it or something.
    I think that you could do with some pics to drive the message home a little bit, but other than that, this is wonderful blog.
    A great read. I will definitely be back.

  4. I do not even know how I ended up here, but I thought this post was good.
    I do not know who you are but certainly you’re going to a famous blogger if you are not already 😉 Cheers!

  5. Outstanding ppost however I was wondering if you could write a litt more on this topic?
    I’d be very grateful if you could elaborate a little bit further.
    Kudos!

  6. Excellent post. I was checking continuously this blog and
    I am impressed! Very useful information specifically the last part 🙂 I care for such info much.

    I was seeking this particular info for a long time. Thank you and good luck.

  7. I blog quite often and I genuinely appreciate your
    content. This greatt aricle has really peaked my interest.
    I will take a note of your blog and keep checking
    for new details abnout once per week. I subscribed to your
    Feeed too.

  8. Hey I am so ggгateful I found your blog, I rеally
    found yyou by error, whjle I waѕ researching on Askjeeve for sometɦing elsе, Anyhow I am here noԝ and wоuld just like to say thanks a lot
    for a tremendous pоst and a all round thrilling blog (I alo love the theme/design),
    I ԁon’t have time too read itt all att the minute bսt I have book-marked it and also adced in youг RSS feeds, so when I have time
    I will be bacdk to rаԀ more, Pleаse do keep uр thе awesomee job.

  9. Highly energetic article, I enjoyed that bit. Will there be a part 2?

  10. I’ve been exploring for a little while for top quality articles
    or blogs on this kind of area. Exploring in Yahoo I finally came across this website.

    Looking over this info made me discovered just what I needed.
    I will visit your website often.

  11. Asking questions are actually fastidious thing if you are not understanding anything totally, except this
    piece of writing offers fastidious understanding even.

  12. Hello to every body, it’s my first pay a quick visit of this website; this website carries awesome and in fact excellent information in favor of
    readers.

  13. Excellent post. Keep posting such kind of information on your
    blog. Im really impressed by your blog.
    Hey there, You have performed a fantastic job. I will definitely digg it and
    in my view recommend to my friends. I’m confident they’ll be
    benefited from this web site.

  14. Tayla says:

    Hi, I log on to your blogs on a regular basis. Your writing style is awesome, keep it up!

  15. Kit says:

    Hi there, just wanted to tell you, I liked this post.
    It was helpful. Keep on posting!

  16. What’s up, yes this piece of writing is genuinely fastidious and
    I have learned lot of things from it regarding blogging.
    thanks.

  17. You can certainly see your enthusiasm within thee work you write.

    The arena hopes for even more passionate writers
    likee you who aren’t afraid tto mention how they believe. All
    the time follow your heart.

  18. Hello there! Ι could have swoгn I’ve been to this sitе before but after
    browsing through some of the ρoѕt I realized
    it’s new to me. Anyhߋw, I’m definitely glad I found it
    and I’ll be book-marking аnd checking back frеqսently!

  19. goo.gl says:

    Great site you have here but I was curious about if you knew of any forums that cover
    the same topics talked about here? I’d really like to be a part of online community
    where I can get advice from other experienced individuals that share the same interest.
    If you have any suggestions, please let me know. Cheers!

  20. model tas says:

    Ahaa, its fastidious conversation about this piece of writing here
    at this web site, I have read all that, so at this time me
    also commenting at this place.

  21. Everything is very open with a really clear description of the issues.
    It was really informative. Your site is useful. Thanks for sharing!

  22. Hannaway says:

    Aw, this was an incredibly nice post. Spending some time and actual effort to generate
    a really good article… but what can I say… I hesitate a whole lot and don’t
    manage to get nearly anything done.

  23. You made some good points there. I looked on the internet for the issue
    and found a lot of people will go along with your website.

  24. Way cool! Some very valid points! I appreciate you penning this
    post and also the rest of the website is reallpy
    good.

  25. I like it when folks come together and share opinions. Great blog, keep it up!

  26. Montejano says:

    I enjoy what you guyss tend to bbe up too. This sort of clever work and coverage!
    Keep up the amazing works guys I’ve you guys
    to blogroll.

  27. Hi everybody, here every person is sbaring these experience, thus it’s fastidious to read this web site, and I used to visit this weblog all
    the time.

  28. This iis a topic which is close tto my heart…
    Many thanks! Where are your contact details though?

  29. Anja says:

    hi!,I really like your writing so much! percentage we be in contact more approximately your post on AOL?
    I need an expert on this space to resolve
    my problem. Maybe that’s you! Taking a look forward to
    peer you.

  30. My spouse and I stumbled over here by a different website and thought I might check things out.
    I like what I see so i am just following you. Look forward to looking into your web page again.

  31. Joyce says:

    Thank you for another informative web site. The place
    else may just I am getting that type of information written in such an ideal
    approach? I’ve a challenge that I’m just now operating on, and I have been at the glance out for such info.

  32. Nice blog here! Also your website loads up very fast!
    What web host are you using? Can I get your affiliate link to your host?

    I wish my website loaded up as quickly as yours lol

  33. www says:

    Wow, wonderful weblog structure! How long have you
    been blogging for? you made blogging glance easy.
    The total look of your website is fantastic, let alone the content material!

  34. Hi there I am so glad I found your blog page, I really found you by mistake,
    whiole I was searchhing on Bing for something else, Anyhow
    I am here now and would just like to sayy thanks for a marvelous
    post and a all round entertaining blog (I also love the theme/design), I don’t have time to browse it all at
    the minute but I have bookmarked it and also added your RSS feeds, so when I have time I will be back to read a lot more, Please do keep up the excellent jo.

  35. If some one wishes expert view concerning running a blog after that
    i recommend him/her to go to see this web site, Keep
    up the pleasant job.

  36. Magnificent goods from you, man. I’ve remember your stuff previous to and
    you’re simply tooo fantastic. I really like what you’ve acquired here, certainly
    like what you’re saying and the best way by whoch you assert it.
    You are making iit entertaining and you still take care of to stay it sensible.

    I can’t wait to read far more froim you. That is really a wonderful site.

  37. Very nice post. I just stuimbled upon your blog and wanted to mention that I have truly loved
    browsing your blog posts. After all I will be subscribung for your rss feed and I am hoping you write again soon!

  38. I must thank you for the efforts you’ve put in penning this
    site. I am hoping to check out the same high-grade blog posts by you
    in the future as well. In truth, your creative writing abilities has encouraged me to get my
    own, personal website now 😉

  39. Bickering over an insignificant content to the game gives the impression that they are too stupid to understand its
    literary content. As you see these are all games which provide lots
    entertainment and are all free. The place of the game shows the true story of New York City.

  40. Well it is an incredibly wonderful write-up.Thanks for sharing this type of information here.I’m hoping you will continue enlightening individuals in future also,with such a important info.Carry on the good work.

  41. Leland says:

    I do bbelieve all the conceptgs you have offered in your post.
    They’re very convincing and will definitely work.
    Still, the posts are too quuick for starters. Could you please extend them
    a ligtle from subsequent time? Thank you for the post.

  42. Marita says:

    Heey there! Do you know if they make any plugins
    to protectt against hackers? I’m kinda paranoid about losing everything I’ve worked hard on. Any recommendations?

  43. Sherlyn says:

    Undeniably believe that which you said. Your favorite jusstification seemed to be on the net the easiest thing to be aware of.
    I say tto you, I definitely get irked while people
    consider worries that they just do not know about. You managed to hit the nail upon the top
    and defined out the whole thing without having side effect , people
    can take a signal. Will likely be back to get more. Thanks

  44. 2004. Our research imported it from New Zealand and has taken.

  45. Do you mind if I quote a few of your posts as long
    as I provide credit and sources back to your website?
    My website is in the exact same niche as yours and my users would really benefit from a lot of the information you present here.
    Please let me know if this okay with you. Cheers!

  46. Very nice article, exactly what I wanted to find.

  47. obviously like your web site but you need to test the spelling
    on quite a few of your posts. Many of them are rife with spelling
    problems and I in finding it very troublesome to tell
    the truth then again I’ll definitely come back again.

  48. Whats up are using WordPress for your blog platform?
    I’m new to the blog world but I’m trying to get started and
    set up my own. Do you require any html coding knowledge
    to make your own blog? Any help would be really appreciated!

  49. diet plan says:

    Thanks ffor the good writeup. It in reality was a entertainment account it.

    Glanhce complicated to more introduced agreeable
    from you! However, how can we keep up a correspondence?

  50. I was wondering if you ever considered changing the structure of your blog?
    Its very well written; I love what youve got to say.
    But maybe you could a little more in the way of content so people could connect with it better.
    Youve got an awful lot of text for only having 1 or 2 images.
    Maybe you could space it out better?

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: